Tag Archives: GEOF130

Fjord circulation

1 Reply

Tank experiment on a typical circulation in a fjord.

Traditionally, a fjord circulation experiment has been done in GEOF130’s student practicals. Pierre and I recently met up to test-run the experiment before it will be run in this year’s course.

This is the setup of the experiment: A long and narrow tank, filled with salt water, a freshwater source at one end and an outlet at the other end. This sets up a circulation from the head towards the mouth of the fjord close to the surface, and a deep return flow.

Watch the movie below to see how different circulations are set up depending on the depth of the freshwater source. As in the picture, velocity profile 1 is for the case where freshwater is being added close to the surface, and in case 2 the freshwater is being added deeper down.

Standing waves.

1 Reply

A seesaw to visualize how standing waves move in an enclosed basin.

In enclosed basins, standing waves can occur. In the simplest case, they have a node in the middle and the largest amplitudes at the edges of the basin. The movement of the water’s surface then closely resembles that of a seesaw.

IMG_5059

A seesaw. Largest amplitudes at the ends, node in the middle.

Extremely simple but extremely effective visualization!

Progressive waves on a rope

1 Reply

Visualization of progressive waves: wave form and energy move forward while the rope itself stays in place.

When I talked about waves in GEOF130 recently, in order to explain the concept of progressive waves, I showed a drawing from one of the textbooks, where someone was moving a rope such that waves traveled on the rope. The idea was to show that for progressive waves the wave form and energy travel, while the matter itself stays more or less in place, only moving up and down or in circular orbital motions.

The look I got from one of the students for showing that drawing confused me a bit and I am still not sure whether it was a “I have no idea what you are trying to tell me!” or a “Duh! Are we in kindergarden?”, but I think it was probably closer to the former. So from now on I will carry a piece of rope on me to show this in lectures and to have students try themselves.

A wave shape traveling forward on a rope, while the rope itself stays in place.

I filmed a quick video because it was difficult to watch the wave while exciting it myself, but it turns out it is even more difficult to hold a camera more or less steady while exciting waves at the same time, plus the movement is pretty quick even for a camera as awesome as mine. Anyway, if you want to procrastinate learn more about waves, watch this!

How a CTD works

7 Replies

Movie on how the most important instrument in oceanography works.

On our cruise on the WHOI research vessel Knorr in 2011, Sindre Skrede (find him on twitter or vimeo for many more exciting pictures and movies!) and I made a movie for his blog, describing the most important oceanographic instrument. We recently translated the movie from Norwegian to English and here it is. Enjoy!

Internal waves in the atmosphere

2 Replies

A photo of internal waves in the atmosphere.

Internal waves exist on the interface between fluids of different densities. In the ocean they are mostly observed through their surface imprint. In the tank, we could also observe them by looking in from the side, but this is hardly feasible in the ocean. But luckily vision is easier in the atmosphere than in the ocean.

On our research cruise on the RRS James Clark Ross in August 2012, we were lucky enough to observe atmospheric internal waves, and even breaking ones (see image above). This is quite a rare sight, and a very spectacular one, especially since, due to the low density contrast between the two layers, the waves break extremely slowly.

It is really hard to imagine what it looked like for real. This movie shows the view of Jan Mayen – the volcano, the rest of the island and then the atmospheric waves. Please excuse the wobbly camera – we were after all on a ship and I was too excited to stabilize properly.

Details of lee waves in the tank.

Leave a reply

A movie focusing on details of the lee waves in the tank.

In this post, we investigated lee waves in a tank in a general way. Here, I want to show a detail of those lee waves:

In this movie, the concept of hydraulic control becomes visible. On the upstream side of the mountain, the dense water layer forms a reservoir which is slightly higher than the mountain. On top of the mountain and towards its lee side, the layer of denser water is stretched thin and has a smooth surface until about half way down the mountain, where waves start to form. In this thin, smooth layer, flow speeds are higher than the wave speeds, hence disturbances of the interface are flushed downstream and cannot deform the interface. Only about halfway down the mountain, the phase speed becomes equal to the flow speed, hence waves can both form and stay locked in place relative to the mountain.

For more information on internal waves, check out these posts [which are scheduled to go online over the next couple of days]:

Surface imprints of internal waves

7 Replies

How internal waves in the ocean can be spotted on the surface.

Under certain conditions, internal waves in the ocean can be spotted at the ocean’s surface due to changes in surface roughness or to the movement of floating foam or debris. They can be spotted if half their wavelength is longer than the distance between the interface on which the internal wave is traveling and the water surface, so that the orbital movement caused by the internal waves reaches the water surface. In the tank, they can also be seen – for example by adding small floating particles to the water surface.

MVI_3064

Internal wave in a tank. Seen from the side due to different coloring of the two layers, and on the surface in the distribution of floating tracer.

In the movie below, you can see the interface between water layers of different densities and the water surface with particles on it. The particles make it easy to spot how the water surface is being stretched and squeezed as internal waves travel through underneath.

For more information on internal waves, check out these posts [which are scheduled to go online over the next couple of days]:

Internal (lee) waves in a tank.

1 Reply

Lee wave experiment in a large tank with a moving mountain.

In this previous post, we talked about internal waves in a very simple experiment. But Geophysical Institute has a great tank to do lee wave experiments with that I want to present here (although it doesn’t seem to be clear what will happen to the tank when the remodeling of the main building starts in November – I hope we’ll be able to save the tank!). I think it has originally been used for real research, but these days the GEOF130 lab is the only time this tank gets used.

MVI_2787_01

Tank for internal lee wave experiments – a “mountain” is moved through the tank and generates internal waves.

In this tank, a “mountain” can be moved all the length of the tank through more or less stagnant water, thereby simulating a current going over a non-moving mountain (which might be a slightly more realistic setup). At the lee of the mountain, lee waves form on the interface between two water layers of different density.

For more information on internal waves, check out these posts [which are scheduled to go online over the next couple of days]:

Internal waves in a bottle

2 Replies

Internal waves are shown in simple 0.5l bottles.

Waves travel on the interface between fluids of different densities and the phase speed of those waves depends on the density difference between the two fluids.

MVI_4505_02

MVI_4505_03

Internal waves on the interface between water (dyed blue) and white spirit.

The simplest way to demonstrate this in class can be seen below – two 0.5l plastic bottles are used, one half-filled with water, the other one filled with half water, half vegetable oil. Waves can very easily be excited by moving the bottles, and it is clearly visible that the waves at the interface between water and oil are a lot slower than the ones on the interface between water and air.

For showing this experiment to larger audiences when people can’t play with the bottles themselves, it really helps to color either the water or the oil layer for greater contrast. See here for different combinations that we tried in connection to forskningsdagene in Bergen.

Incidentally, those internal wave bottles are a great toy. If you don’t have one available but wish you had a paper weight as awesome as mine on your desk, here is a movie for you:

How mountains form

Leave a reply

A very simple visualization of rock folding.

Stress is being applied to a piece of fabric from two sides. Over panels 1 to 4, “mountains” start forming.

See? When I said “very simple” I meant “very simple”. But it does help explain why sometimes rock layers are not nice and horizontal.

Oceanography teachers investigating rock formations on one of the field trips of the “teaching oceanography” workshop in San Francisco in 2013.

This demo works really well with a piece of paper towel, too, especially if that is grabbed from a dispenser in the lecture theatre during the lecture and hence the impression is conveyed that it is a spontaneous visualization rather than one that was carefully planned…